Sep. 29, 2020
The Z-shaped steel machine is different from the glass tile machine. It is hydraulically powered and has a large power, usually around 22KW, similar to the shearing and bending machine products. The general control process is more complicated, and PLC control technology is mostly used. The process flow: the strip steel is fed from the tail of the Z-shaped steel machine, and is pressed into the Z-shaped steel machine by various rollers and sent out from the head.
In the traditional process, after Z-shaped steel is pressed into shape, it needs to be manually cut to a fixed length, and then transported to the punching equipment to punch holes according to the size required by the customer. The production cannot be continuous and the efficiency is not high. After the gradual improvement of the production process, the automatic control of the process is finally realized, which greatly improves the production efficiency of the product, and increases the technical content and added value of the equipment. When selecting the Z-shaped steel machine, the different characteristics of the product should be considered. In the light steel industry plant, when there is a large suspended load or moving load, you can consider abandoning the portal frame and adopting the grid frame.
High-strength: High-strength steel plate is used as the base material (tensile strength 5600KG/CM), plus the structural characteristics of the first design and roll forming.
Fire protection: The surface material and insulation material of the color composite sandwich panel are non-combustible materials, which can fully meet the requirements of fire protection regulations. Fast installation: The composite board is light in weight, spliced installation and can be cut at will, which determines its ease of installation, which can greatly increase benefits and save construction time.
Durability: A variety of studies have shown that it has been widely used for more than 40 years. The shelf life of color steel plates treated with special coatings is 10-15 years. Afterwards, anti-corrosion coatings are sprayed every 10 years, and the life of the plates can reach more than 35 years.
Beautiful: The clear lines of the profiled steel plate are as many as dozens of colors, which can meet the needs of any style of building and achieve satisfactory results. The Z-shaped steel machine is mainly composed of a passive discharge frame, a discharge frame base, a feed introduction platform, a leveling device, a forming host, a punching device, a forming and cutting device, a hydraulic station, and a computer control cabinet.
