Home > News

Glazed tile machine production matters

Aug. 13, 2019

Characteristics of glazed tile machine control system: The control system is easy to operate, normal automatic production does not need to be reversed first, but one advance, press type, and cutting is completed. High precision, each piece of cutting precision is less than 0.1mm, meeting the process requirements. Program operation Stable and reliable. The implementation part has two drive solenoid motor, hydraulic station motor and two hydraulic solenoid valves. The glazed tile machine has the following parts: pulse encoder for detecting the length of colored steel tile, press-type upper and lower stroke switch, cutter Up and down stroke switch, press type up and down operation button, cutter up and down stroke button, emergency stop switch, hydraulic start and stop switch, etc.

The glazed tile machine is divided into three parts: the roller forming part, the pressing part and the cutting part. The roller forming part is dragged by the motor, and the chain drives the rolls to rotate. The pressing part is the hydraulic cylinder driving the mold up and down to press the color steel In many sections, it looks like a glazed tile. The cutter part is a hydraulic cylinder that drives the tool up and down to cut off the colored steel tile.

The production process of the glazed tile pressing machine is as follows: the colored steel plate enters the forming part of the roller table, and after molding, it is pressed into the pressing part, and is pressed into a section of equal distance, and the cutting knife is responsible for the fixed length cutting.

1. Wear tight protective clothing before operation, fasten the cuffs, and the hem of the top should not be open. Do not wear or change clothes around the machine, or cloth around the body to prevent the machine from being wounded. You must wear a safety helmet. Put into the cap, do not wear skirts, slippers, color steel tile machine parts should always be kept lubricated, each shift should be filled by the operator once, every six months by the mechanic to fill the rolling bearing parts once.

2, color steel tile machine is suitable for the production of various steel plate, aluminum plate, metal material plate with material thickness of machine tool rating, and must be no hard marks, welding slag, slag, weld material, no super thickness.

3, the use of color steel tile machine:

a, according to the thickness of the production material, adjust the gap of the roller.

b. Color steel tile pressing machine should be operated for 1 - 3 minutes before operation.

c. There will be a difference in width after replacing the steel coil, and the width of the feed baffle should be adjusted in time to be moderately tight.


Contact Us
Follow Us