Home > News

Maintenance knowledge of cold forming equipment

Jan. 19, 2019

Common knowledge of pressure tile machine equipment and renovation of composite board machine

The blanking machine equipment is used to manually place the blank, and the blanking work procedure: Before using the equipment, check whether the connection is firm, whether the mounting bolts and nuts are tightened, and the lubricating oil should be added to the left and right chassis to start the machine for commissioning. Careful observation of the car operation, whether there is vibration, noise, whether the oil window comes to the oil, whether the movement of each component is coordinated, the mold can be installed after normal, when the mold is installed, the power is cut off, and the motor belt or the large gear is manually moved to make the worktable turn Position, and raise the slider to a high point, with an object supported between the workbench and the bottom surface of the slide, the anti-slip seat naturally falls, causing an accident. The mold used in this machine needs an upper mold and six identical sizes. The lower mold is first installed with the upper mold and one lower mold. The lower mold is directly mounted on the hexagonal runner table. The upper mold is mounted on the bottom surface of the sliding seat, and a suitable thickness of the spacer is placed to ensure that the upper and lower molds are closed after the mold is closed. The gap is even, the distance between the upper and lower molds is equal to the thickness of the required tile blank. Then the upper mold is correct, the table is indexed, and the remaining five lower molds are installed. After all the upper and lower molds are installed, the brake can be driven. Automatic discharging , take the blank process Preface: mold installation and host test the same as above, then open the air compressor, vacuum pump, extruder, cutting machine, discharge machine, tile machine, main machine and tile conveyor, stop the extruder first, Then stop the rest of the equipment.

Features of the pressing machine: The equipment has the advantages of operation, maintenance, maintenance, mechanical debugging, easy mold change, etc. The whole unit automation control system adopts a highly integrated network to make the automation system superior in performance; the equipment adopts high level automatic control software. To achieve production information management.

Contact Us