Mar. 30, 2023
The color steel tile press is equipped with a set of lubrication system. When the machine is running, it automatically lubricates all the bearing, transmission gear mechanism, motion guide rail and other parts. The worktable of the color steel molding equipment has six processes (i.e. hexagonal runner). The turnover of the worktable has a set of positioning mechanism in addition to mechanical indexing and positioning, During each stamping process, the accurate positioning of the worktable die is fully ensured. The sliding table for installing the upper die is a box structure, and the sliding table guide rail has a large contact length with the upper guide rail of the fuselage. In each stamping process of the upper die, there is a secondary stamping for the mud blank, that is, after the upper die presses the tile blank in place once, the upper die rises by 10 mm, so that the mud blank is fully vented, and then the upper die presses the tile blank downward in place, and then returns to the high position, Therefore, the service life of the mould is long and the quality of the pressed products is good
Feature 1: guide four column type high-speed molded tile equipment: it adopts a number of technologies, the main engine "body" is not welded, all made of "cast steel", so the whole machine will not produce "stress" due to "welding" and cause "main engine" body deformation. The "pressure cylinder and main tile mold" of the main engine is bound to the "four solid guide hydraulic prop" of 120mm by "guide sleeve", The vertical movement of the "main tile die" will not produce vertical deviation, especially for the vulnerable of the main tile die, which plays a protective role and greatly extends the service life of the "main tile die"
Feature 2: the first generation and the second generation of "fully automatic molding color steel tile equipment" both adopt "swing cylinder driving sliding table". The "swing cylinder" belongs to the "molding color steel tile equipment", which is a "vulnerable" accessory. If the molding speed is too fast, the sliding table will have a large impact force, the buffer will be easy to vibrate, and the tiles will have cracks from time to time, It is a "stubborn disease" in the first and second generation of color tile equipment. Therefore, the molding speed is fast, up to 6 pieces per minute. The "guided four column molding color steel equipment" uses "tarpaulin ring"; the built-in straight oil cylinder "sliding table drive" adopts intelligent hydraulic buffer technology. The sliding table hydraulic buffer can be freely adjusted, so that the sliding table runs smoothly and reliably
