Jul. 26, 2019
Characteristics of glazed tile pressing machine;
1, the appearance is exquisite, not only has the traditional taste of traditional bricks, it is elegant;
2, light weight, good hardness;
3, has a strong wind resistance, heat resistance, sound absorption and water resistance.
The glazed tile pressing machine is divided into three parts, the roller forming part and the cutting part. The forming part of the roller is driven by the motor, and the chain drives the rollers to rotate. The pressing part is the hydraulic cylinder driving the mold to move up and down, and the color steel can be pressed. In many sections, it resembles a glazed tile. The cutter part is a hydraulic cylinder that drives the tool up and down to cut the colored steel tile. The production process is as follows; the colored steel plate enters the forming part of the roller, and is formed into a profiled part after molding. In one section, the cutter is responsible for the fixed length cutting. The color steel tile pressing machine belongs to the cold-rolled steel equipment. At present, its operation is not too complicated, because there is a computer control system, it only needs to be in the actual production process. The required size and data can be input into the computer. This kind of control system will complete the production according to the relevant input, which is simple and convenient.
The use of glazed tile tile machine equipment distribution cabinet; forward and reverse is controlled by the inverter to control the host forward and reverse, its speed can be controlled by the high speed / low speed switch on the panel. In the automatic operation, the speed switch must be placed at high speed. The undercut and return buttons are used to control the cutter operation. If the cut and return buttons are invalid, generally the hydraulic oil tank should be considered.
Too low, the hydraulic oil should be added to the box. In addition, during the cutting and returning process of the cutter, the limit switch operation in front of the cutter will stop automatically. The oil pump switch is used to control the start and stop of the oil pump. Before running, please open it first. Oil pump to provide pressure to the hydraulic system.
